ACT Bare Metal Test Panels

Selected Filters:

ACT Hot Dip Galvanized Unexposed (70 g/mÂ²) 4" x 6" x 0.030" with Mill Oil and an Extra Hole at Bottom of Panel
ACT Aluminum 6061-T6 4" x 6" x 0.032" with Mill Oil and an Extra Hole at Bottom of Panel
ACT Cold Rolled Steel 4" x 6" x 0.026" with Mill Oil and an Extra Hole at Bottom of Panel
ACT Electro Zinc Galvanized (60 g/mÂ²) 0.787" x 3.543" x 0.030" ISO 11343 Symmetric Wedge Panel with Mill Oil per Diagram
ACT Cold Rolled Steel 2" x 4" x 0.032" with Mill Oil and Two 3/16" Holes in Two Side Corners per Diagram
ACT Cold Rolled Steel 0.787" x 3.543" x 0.030" ISO 11343 Symmetric Wedge Panel with Mill Oil per Diagram
ACT Aluminum A380 (Cast) 4" x 6" x 0.125" with 5 Holes 12mm in Diameter per Diagram with with Mill Oil Ecoat:
ACT Aluminum 6061-T6 3" x 10" x 0.032" with a 1/4" Hole at Both Ends of Panel and with Mill Oil and a Protective PVC Coating on One Side
ACT Aluminum 2024-T3 3" x 10" x 0.032" with Mill Oil and a Protective PVC Coating on One Side and Date of Manufacture Stamp per Diagram